Tel:+86 21 50152058
E-mail:info@pan-resources.com
Add:No. 1521 Jia Tang Highway ,Lou Town, Jiading District ,ShangHai,China

Inconel 600
    

A nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion. Used for furnace components, in chemical and food processing, in nuclear engineering, and for sparking electrodes.

UNS: N06600 / W.Nr.: 2.4816

Limiting Chemical Composition

Alloy

%

Ni+Co

Cr

Fe

C

Mn

S

Cu

Si

Alloy600

Max.

17.0

10.0

0.15

1.0

0.015

0.50

0.50

Min.

72.0

14.0

6.0

Nominal Mechanical Properties

Density

g/cm3

Melting Range  °C

Tensile Strength

Rm N/mm2

Yield Strength

RP 0.2N/mm2

Elongation

A5%

8.47

1354-1413

550-690Mpa

205-345Mpa

35-55

A broad range of strength and hardness is obtainable with INCONEL alloy 600, depending on form and condition. In the annealed condition, the alloy exhibits moderate yield strengths of 25,000 to 50,000psi (172 to 345 MPa). Yield strengths in that range, combined with elongations of 55 to 35%, permit the alloy to be fabricated with little difficulty. Heavily cold-worked material, however, can have tensile strengths as high as 220,000 psi (1517 MPa). Values for properties reported in this publication are typical but are not suitable for specification purposes unless stated as minimum or maximum. Mechanical Properties.

Available Product Forms: Pipe, tube, sheet, strip, plate, round bar, flat bar, forging stock, hexagon, wire and extruded section

Shanghai YiHe Alloy Technology Co., Ltd ©Copyright Support
Add:No. 1521 Jia Tang Highway ,Lou Town, Jiading District ,ShangHai,China
沪ICP备:06010094号